I drilled each side individually. Drilled one side, flipped and drilled the other
Help! PF9ss Issues
- Thread starter user10
- Start date
I’d appreciate any ideas from yall on how to fix this (or just leave it be)
I’m just confused how this happened. I’m just gonna return my dremel press and go back to the drill and vice. But, I’ve already drilled these two frames and can’t go back.
I’m just confused how this happened. I’m just gonna return my dremel press and go back to the drill and vice. But, I’ve already drilled these two frames and can’t go back.
You can close the holes and re-drill.
I would sand the top of the housing as recommends and see if you can make it work. If not, your other option would be to fill and redrill.
Oof. Closing the hole and redrilling is a last last resort
Oof. Closing the hole and redrilling is a last last resort
To me.... it's the first resort if the problem is the pin holes. IMO, the quality and functionality of a P80 build begins and ends with the accuracy of the pin holes.
I've never had to re-drill, but if I was having a problem fitting the parts to the frame, that's the first place I'd look.