The g26 has so much more finish work then this g43 seems to have. This g26 has many infill rows that need to be removed from the lower before it’s functional and the g43 was not printed with all those thin infill lines but it did some funky passes in the trigger guard area of the frame. I’m not sure why it did that, has anyone had this happen? I’ll attach pictures.
One print looks like ALOT more wore to finish then the other
- Thread starter Pagss
- Start date
- Joined
- Dec 31, 2024
- Messages
- 551
- Reaction score
- 529
- Points
- 108
You may find that 'tree' supports are much easier to remove, use a lot less material, and print a good deal faster than normal supports.
As for the 43 trigger guard, it looks to me that the support distance is too far. What does the RSA channel look like after removing the supports?
As for the 43 trigger guard, it looks to me that the support distance is too far. What does the RSA channel look like after removing the supports?